Creative Woodworks & crafts 2000-11, страница 8

BILL OF MATERIALS

Part Description Size in inches

Mahogany:

A Inner bottom panel 1/4x4-3/4x9-1/4

B Sides 1/4x2-1/2x4-3/4

C Front/back 1/4x2-1/2x11-1/2

D Lid/bottom 1/4x7-9/16x12

E End pieces 1/4x2-1/2x7/8

F Lid support strips 1/4 x 1 -1/4 x 4-3/4

G Side trim pieces 1/4x7/16x2-1/4

H Front/back trim pieces 1/4 x 7/16 x 9-1/4

I Handle 1/2x1-1/2x6-3/4

J Feet 1/4x2-1/2x2-1/2

Quantity

SUPPLIES

Tools: table saw (or similar); scroll saw; drill with bits including

a 3/32"-Dia. and a 5/32"-Dia. bit Temporary-bond spray adhesive Sandpaper (assorted grits) Wood glue

Two No. 6 x 3/4" wood screws

Small brads

Clamps

Rubber bands

Finish of choice

INSTRUCTIONS

Cut the pieces

Attach the patterns to the wood using spray adhesive. Cut all pieces accordingly.

Make the box assembly

Fasten the sides (B) to the ends of the inner bottom panel (A) with glue and small brads (see Fig. 1). Next, with glue and small brads, attach front and back (C) by positioning the sides to line up behind the dotted line areas indicated on the pattern (see Fig. 2).

Set the box centered on top of the piece selected to be the bottom (D). Glue the assembly in place and fasten it securely with

continued on page 10