SUPPLIES

\%V

NASCAR PLAQUE

designed by Bobby Redd

Wood: birch plywood—one piece 3/4" x 8" x 17" (for the car); Baltic birch plywood—two pieces 1/8" x 1-1/2" x 1-5/8" (for the large numbers), two pieces 1/8" x 1" x 1-1/8" (for the small numbers)

Tools: scroll saw with assorted blades; drill with bits

Temporary-bond spray adhesive

Sandpaper, assorted grits

Stain of choice

Clear finish of choice

INSTRUCTIONS

Attach the car pattern to the 3/4" plywood with spray adhesive. Bore blade entry holes in the waste areas of the pattern and saw it to shape. Sand the cutout and stain as desired. Determine which number you wish to adhere to your car and transfer those patterns to the 1/8" plywood (in the case of the car pictured, we chose "88"). Saw the numbers to shape. Sand as necessary and, referring to the photograph, glue the numbers in place. Apply clear finish of choice to the plaque. Hang your plaque and enjoy the races! ^

March. 2001

g?6«i»SS® J

f/ttss*tm H9m%9m ans&SKxm *««««« *8»