Creative Woodworks & crafts 2001-04, страница 56

by Ron Kurtzhals of Kurtz Woodworking

Creative Woodworks & Crafts

INSTRUCTIONS

Cut the components

Referring to the Bill of Materials, as well as the Plan View Drawings, size the various components and cut them to shape. Cut the dados as indicated on the side pieces and the shelf, and bore the appropriate holes. Sand as necessary.

Detail the front

Transfer the pattern from the Full Size Pattern Section onto the front piece (C). Bore 1/16"-Dia. holes for all inside cuts. I prefer to use crown tooth Nos. 5 or 7 blades here. Blade entry holes for the veining of the flowers are made with a No. 60 mini bit and are cut with a No. 0 or 2/0 spiral blade.

Use a Dremel Moto-Tool with routing attachment and mini roundover bit to rout a decorative edge on the tissue opening. You can round over the edges or put an ogee design here.

BILL OF MATERIALS

Part Description

Oak:

A Sides

B Center support

C Front piece

D Shelf

E Lid

F Centering posts Oak plywood:

G Back piece

Size in Inches

Quantity