Creative Woodworks & crafts 2001-06, страница 8

Creative Woodworks & crafts 2001-06, страница 8

rnMm

by Vernon Brown of The Wooden Teddy Bear, inc.

ijp i I pn m 1 | ft I \ INSTRUCTIONS

.: Adhere pattern to \vo'o£ y4th spray adhesive.' Using the 2-3/8M-Dia> Forstner bit, bore the hole for the insert as indicated on the pattern.: Note: this hole should be made prior to any other cutting. Most 2-3/4"- fit-ups are slightly deeper than 1/2', therefore a smail spacer may be desired here so - that the project hangs evenly. Drill 1/16"-Dia. biade entry holes (or smaller on some cutouts) for all interior cuts. Make all inside outs using the Nos. 5 and 7 blades and all outside cuts, using the No. 12 blade. Note: complete all interna! cuts before making ,the outside cuts, as this will give a much more stable piece of wood with which to work,

Gentiy sand .the surtaxes and edges-as required. Appiy finish of choice ]f hacking is desired lightly glue colored paper or felt to the back of (he project, leaving the insert hole open

Install your chosen 2-3/4" insert. Attach sawtooth hanger and enjoyi |-| ,

SUPPLIES

Wood: hardwood of choice—-one piece 1/2" x 10" x 8-1/2" Tools: scroll saw with Nos. 5 and 7 reverse tooth or crown tooth blades (for inside cuts) and No. 12 reverse tooth or crown tooth blades (for outside cuts); drill with bits including a 1/16"-Dia. and a 2-3/8"-Dia. Forstner bit Temporary-bond spray adhesive (3M #77) Sandpaper, assorted grits 2-3/4" insert (clock, thermometer, etc.)* Clear finish of choice Sawtooth hanger (2" wide) Colored paper or felt (optional) Wood glue (optional)

*Inserts as well as twenty more Diamond Clock patterns are available from The Wooden Teddy Bear, Inc. For a free catalog, call (888) 762-9149 or visit their new website at www. woodenfeddybearonline. com.