Creative Woodworks & crafts 2001-08, страница 42

C2\

F^ive FRotains

by Stephen M. Ripski of Rip N^: Woodworks

SUPPLIES

Wood: oak plywood--one piece 1/8" x 12" x 12" (for the pattern pieces); walnut—one piece T x 10" x 14" (for the \

clock base) ? Tools: scroll saw with Nos. 5 and 7 blades; drill with 1/16" \

and 3/8"-Dia. bits and a 3-1/8"-Dia. Forstner bit

Temporary-bond spray adhesive \

Sandpaper, assorted grits |

Wood glue \ Danish oil finish

Small paintbrush |

Spray polyurethane, gloss finish §

Sawtooth hanger \ Quartz clock movement of choice

12 • Creative Woodworks S. Crafts August 2001

INSTRUCTIONS

Step 1. Transfer the patterns to the selected stock with spray adhesive. Make sure that the grain is running from left to right. Note: multiples of the pattern pieces can be stack cut. You can stack up to eight pieces of wood; however, I prefer to stack just six. This makes it a bit easier and faster to cut. Hold the plywood together with masking tape or duct tape while you cut the pieces.