Creative Woodworks & crafts 2001-08, страница 47

n

ill

IBSi

PSIP

^:ifM

INSTRUCTIONS

Make the shelf assembly

Cut the shelf to size and bore the 1/4"-Dia. x 3/8" deep holes in the upper and lower surfaces which will receive the dowels (see the Plan Views of Shelf drawing). Rout a decorative profile on the lower edge of the shelf. Sand the piece as necessary. Cut the wooden squares to 1-1/2" x 1-1/2" and paint them black. Referring to the drawing, glue the small mirrored and wooden squares to the upper surface of the shelf with epoxy.

Transfer the bracket pattern onto two pieces of 3/4" oak plywood and cut them to shape with the scroll saw. Bore two 1/4"-Dia. x 1" deep holes on the top edge of the brackets as indicated on the pattern. Sand the brackets.

Select the desired numerals from the pattern section and enlarge as necessary to fit on the brackets. Transfer the numerals to 1/4" Baltic birch plywood and the letters "NASCAR" to a piece of 3/4" oak plywood. Using the scroll saw, cut four of the numerals and one each of the letters. Sand as necessary.

Attach the brackets to the lower surface of the shelf with wood glue and dowels (see the Shelf Assembly Drawing). Referring to the photograph, glue the numerals in place on the brackets and the letters in place on the lower surface of the shelf.

Make the mirror frame

Transfer the mirror frame pattern to the selected stock and cut to shape. Bore 5/16"-Dia. x 5/8" deep holes in the four ends as indicated. Note: If you choose to cut the entire trame as one piece then doweling the holes together is unnecessary. Join the two halves with wood glue and dowels (see the Mirror Assembly Drawing). When the glue has set, sand the frame so it is smooth and both the inner and outer arcs are round. Rout the rabbet which will receive the mirror around the inside of the rear surface of the frame. Rout a decorative profile on the outer surface of the frame (both inside and outside edges) as indicated on the pattern. Bore three 1/4"-Dia. x 3/8" deep holes into the lower edge of the frame. These holes will receive the dowels which will join the shelf assembly to the mirror.

Select the letters you will use on the mirror frame, transfer to 1/4" Baltic birch plywood, and cut them to shape. Sand as necessary. Referring to the photograph, glue the letters in place on the frame.

Make the race car

Transfer the race car pattern to the selected wood. You can make your car either a Chevy, Pontiac, or Ford depending upon which front end you choose. Using the scroll saw, cut the car to shape. Sand as necessary. Select the numerals you

continued on page 48

Wood so good

you won't want to cut it!

\\

pel

•^ooi This "Baltic Birch" plywood is the ultimate plywood for scrollwork or fretwork. All the plies are birch, with no inner voids so the edges finish beautifully. Our Scroll-PLY is always clear and perfect on one face, though the back may have an occasional plug. Just call for special sizes!

uenva

dvrtHardwooo- _{These are} the solid So hardwood blanks that have

the scroll world talking! Each blank is a clear color matched panel, sanded to thickness. Spend your time scrolling instead of trying to glue and plane wide panels yourself!! Just apply your pattern and start scrolling.

uenva

dvrtHardwooo- _{These are} the solid So hardwood blanks that have

the scroll world talking! Each blank is a clear color matched panel, sanded to thickness. Spend your time scrolling instead of trying to glue and plane wide panels yourself!! Just apply your pattern and start scrolling.

Note: Since most of our products are custom made and very popular, there maybe a production lead time before your order is shipped, please inquire at time of order.

gofwood?

Note: Since most of our products are custom made and very popular, there maybe a production lead time before your order is shipped, please inquire at time of order.

insured Freight Charges

Continental U.S. Addresses OrderValue: $0-$20.00, acid$5.95 Order Value: $20.01-$50.00, add $7.95

Order Vakie: $50.01-$100.00, add $9.95

Order Value Over $100.00, add $10.95

Alaska, Hawaii, Puerto Rico, Canada, and other International

S"

in

CD

Heritage Building Specialties destinations win incur additional 205 N. Cascade freight chargas. Call for quote. -ergus Falls, MN 56537-2208_