Creative Woodworks & crafts 2001-08, страница 50

Creative Woodworks & crafts 2001-08, страница 50

SUPPLIES

Wood: blue pine--one piece 1/2" x 10" x 10": maple—one piece 3/4'' x 3" x 19"; walnut—one piece 3/4" x 2-1/2" x 5"; aspen—one piece 3/4" x 3" x 12"; popter-—one piece 3/4" x 2" x 8"; brown cedar—one piece 3/4" x 1-1/2" x 7"; red cediar—ooe piece 3/4" x 3" x 6"; Baltic birch plywood—one piece 1/4" x 14" x 14" Tools: scroll Saw with blades; drill with;b.its; drum sander; flutter wheel Graphite paper T

Pencil or stylus Wood glue Clear finish of choice Sawtooth hanger

INSTRUCTIONS

Carefully trace the outlines of the respective segments onto the selected stock. Saw the pieces to shape, fitting them as you go. Once the pieces have been cut and fit together, shape them with the drum sander. Sand off any marks left by the sanding drum with the flutter wheel. When you are happy with the fit and all the pieces have been adequately shaped; reassemble the pieces on a piece of 1/4" Baltic birch and trace around the perimeter of the design. Cut the Baltic birch backer to shape, staying on the inside of the traced line so that it will be slightly smaller than the assembled design.

Glue the pieces in place on the backer. When the glue has set, apply clear finish of choice. Add a sawtooth hanger to the back, hang, and enjoy, gi

50 • Creative Woodworks S. Crafts August 2001

%v ---*b

by Barry Lee Martin