Creative Woodworks & crafts 2002-01, страница 52
by Billie Holm INSTRUCTIONS Make two photocopies of the pattern, saving the original for later use, and transfer them to the selected stock with spray adhesive. Bore blade entry holes in the waste area of the pattern and saw out the polar bear scene on the overlay piece, then saw around the perimeter. On the 1/8" backer piece, saw around the dashed line only. Sand as needed. Paint the upper surface of the backer. Center it on the rear of the overlay and fasten it in place with wood glue. Apply clear finish of choice, fasten a sawtooth hanger to the back, then hang and enjoy. Wood: wood of choice—one piece 3/8" x 9-1/2" x 12" (for the overlay); Baltic birch plywood—one piece 1/8" x 9-1/2" x 12' (for the backer) Tools: scroll saw; drill with bits Temporary-bond spray adhesive Sandpaper, assorted grits Paintbrush of choice Black paint Wood, glue Clear finish of choice Sawtooth hanger 52 • Creative Woodworks & Crafts January 2002 BMMWMMgamiBmMMMiStMMI^^ jmrnsmmssssmssms |
