Creative Woodworks & crafts 2004-01, страница 14

few ■

Snowflake Christmas Ornaments

by Sheila Bergner of Toys in The Attic

SUPPLIES:

Wood', mqpfe—one piece 1/4" x 4-1/2" x 4-1 /2" (for

each ornament). Tools; scroll saw with size 2R scroll saw blades: drill with .;■; d bit small enough for;entry holes and a pilot hole for

the hanger' Clear packaging tape

One brass eye hook for each ornament, 1 /2" long Temporary adhesive, spray and glue Sandpaper, medium- and fine-grit Tack cloth Finish of choice

[Patterns Located in Full Size i Pattern Section No. 1!

INSTRUCTIONS

Make copies of the pattern pieces and keep the org!-nals for re-use. Spray a light coat of temporary adhesive ||| on the back of the ornaments. Allow the adhesive to tack up for a couple of seconds. Place the pattern :.S§§ pieces on the wood. If using hardwood, it is recom- _: mended to cover the pattern with clear packaging : tape in order to avoid burn marks in the wood as you ^ cut.

Drill all entry holes. Cut inside cuts first, and work your way outside. Drill a pilot hole for the brass hanger. Sand each ornament lightly by hand. Apply a finishing agent of your choice.

For questions concerning this project, send an SASE to: Sheila Bergner, (708) 532-5624. Email: Scrollgirl@ comcasf.net Website: www.toysintheaftic.com.ws.