Creative Woodworks & crafts 2005-08, страница 57

Make all inside cuts and then cut the outside.perimeter. Remove the paper pattern and any excess glue using mineral spirits, as needed, let dry. Using 220-grit sandpaper, sand both the tront and back of the wood for o smooth finish. Apply Minwax dark walnut stain and let dry. Apply a clear coat of finish and let dry.

SUPPLIES

Wood: tulip—one piece 3/4" x 7" x 11"

Tools; scroll saw with No. 2 spiral blade and Olson No. 5

reverse skip tooth blade; hand drill with 1/16" bit T rrporary-bond spray ad' esVe 220-grit sandpaper Wood glue Meter

M'lwax dark walnut stain Clecr finish of choice Sawtooth hanger Red felt—one piece 8" x 12"

Place the project on top of the felt and use a marker to trace around the outside of the wood onto the felt. (Do not trace the standing wolf portion.)

Using a rolling pin and light pressure, secure the felt to the back of the project. Allow the felt to dry in place, add a sawlooth harger, and enjoy the spirit of the wolf!

Tor questions concerning this projcc.t, send a SASE fo; Damn Ba Idini, Ambrichey Mar or; P.O. Box 11. Hastings, Ontario. Canada KOI. JVO.^

CrFntivfi Woodworks S OaftS 9005 • 57

Apply glue to the outer edges on the back of the project. (Do not apply cny glue behind the standing wolf portion.)

Cut out the felt along the inside of the marker line so that the edges of felt will be hidden when glued into place.