Creative Woodworks & crafts 2005-11, страница 29
INSTRUCTIONS Pholocopy the patterns, reserving I he originals for fulure use. Using spray adhesive, attach the fairy pattern to the appropriate piece of wood. I recommend using clear packing tape on top of the pattern to reduce the burn from the tight turns you will have to make when cutting the pattern. Drill the guide holes, and cuf out the fret pieces. I recommend using a No. 2 reverse tooth blade for the majority of fhe cuts to reduce chipping on the bottom of the piece. I also used fhe No. 2R blade because I was working with 1 /2"-thick wood and wanted to maintain the details ot fhe fairy interior. After cutting, peel the pattern off. Alternatively, use a solvent such as paint thinner to remove fhe paper pattern. Let fhe piece dry before sanding the front and back on a disc or belt sander. Use 220-grit sandpaper to remove any remaining burrs and to lightly round the edges. Clean the fairy using your favorite tool of choice, such as a clean paintbrush. Using spray adhesive, attcch the two base patterns to the wood. Cut them out using a No. 5R blade, remove the patterns, and sand both pieces. If desired, rout the fop edge of the bottom base piece. While there are several ways to attach the fairy to the base, the following is my preferred method because there are no visible joins or screws on the finished piece. Refer to the patterns, assembly diagram, and photographs when determining drilling locations and alignment of the pieces. 1 -800-286-3949 ESS B From two l"-long finishing nails, cut off the heads and approximately 1 /2" of each nail. Drill two small holes in the bottom ol the top base piece. Insert I he nails, shctp end out, into the holes. Center the top base piece onto the bottom base piece and press down to mark the locations for the dowel holes. continued on page 30 SCROLL SAW BLADES... MEMPHIS HARDWOOD LUMBER, INC. 6535 CHURCH ST. MEMPHIS, NY 13 1 12. 1 -(800) 286-3949 (315) 689-3949 wvvw.memphishardwoodlumber.com WHY CHOOSE MEMPHIS HARDWOOD LUMBER? HERE'S WHY: * FAST COURTEOUS SERVICE! * 27 YEARS IN BUSINESS!! * WE M AINTAIN AN INVENTORY OF 60 SPECIES, BOTH DOMESTIC AND IMPORTED HARDWOODS! * HIGH-QUALITY, MILLED ACCURATELY AND CONSISTENTLY! * COMPETITIVE PRICING! BALTIC BIKCH PLYWOOD 1/8- IIm k - |2" X 30" - SI.79 (that's €><)• per square ft.!) I/4* thick - 12" \ 30" - S2.48 (that's <■>«<, |xt square ft..1) TOP-QUALITY HARDWOODS \vi* sell tupqualiiy hardwoods 1/8". 1/4", 3/8" and t/2" thic k at GREAT PRIC1S! CUSTOMIZED GLIjED tiP HARDWOOIJ PANELS Available in any dimensions in thicknesses ol 1/4", 3/8", 1/2", and 3/4". Call for pricing. WE MAKE SCROLL SAWING EXACT!!! TIGER TOOTH scroll saw blades-crafted in Germany and Switzerland for Steebar from the finest quality German steel and tempered for durability. Top quality scroll saw blades at very affordable pricing |
