Creative Woodworks & Crafts-050-1998-winter, страница 31

Creative Woodworks & Crafts-050-1998-winter, страница 31

#111 BOBCAT

#114 PHEASANT

#113 COUGAR and CUB

#112 EAGLE'S NEST

#115 WOLF PACK

degrees and cut halfway between the pencil line and the outer surface. The wavy line should form a slight arc (see Fig. 2). Leaf 5. Set the saw table 4 degrees to the right and cut to the pencil line. Note: both the start and finish of this cut should be close to the pencil line. Leaf 6. Set the saw table 7 degrees to the left and cut halfway to the pencil line.

Leaves 7, 8, and 9. Install a No. 5 blade and set the saw table 15 degrees to the right. Separate the leaves (dolled lines) following the directional arrows.

Change to a No. 7 blade and cut leaves as follows: Leaf 7. Set the saw table 10 degrees to the left and cut halfway to the pencil line. Leaf 8. Set the saw table 10 degrees to the right and cut to and then slightly past the pencil line. Leaf 9. Set the saw table 8 degrees to the right and cut to the pencil line.

Leaf 10. Set the saw table 12 degrees to the left and cut halfway to the pencil line.

Cut the acorns and squirrel

Again, before attempting to cut the acorns for your project, test cut one out of a scrap piece of wood to perfect your technique.

Drill starter holes where indicated and set table 2 degrees to the right. With a No. 5 blade, cut out the acorns. Push the acorns into relief and make two small pencil marks on the edges to indicate the depth. Make one mark at the stem and the other at the right side of the acorn. Set table at 0 degrees and cut along the marked line, cutting the acorn into two pieces.

Place the top half of the acorn on its side with the stem toward the saw blade and the acom face toward the right (see Fig. 3). Next, place the lower half of the acorn on the saw with the ij marked line edge against the table (see Fig. 4). Repeat this cutting process with each acom, including the one from the leaf grouping set aside earlier.

Set the saw table 3 degrees to

JVEW* WILDLIFE PATTERNS I

Introductory Price $4.95 €?<i.

#117 MOOSE

To order or request a catalog, call or write:

Heartland Creations

'P.O. Box 191 ' Yatalt, WA 93875 (360) 686-3133

Add $1.00 shipping/handling per pattern - S4.G0 maximum WA Residents add 7.6% sales tax

H! C6