Monarch of the

sawn by Wes Demarest

by Wildwood Designs

WiWWcWW'

mm 1

This popular pattern, which appeared in the February 1994 issue, was one of the first of many wildlife scroll sawing patterns featured in Creative Woodworks & Crafts.

SUPPLIES

Wood: walnut—1/4" x 9-3/4" x 13-3/4" (for the silhouette); birch—MA" x 9-3/4" x 13-3/4" (for the backer board) Tools: scroll saw with No. 5

blades; drill with bits Temporary-bond spray adhesive ii Sandpaper, assorted grits Sharp knife or needle file Finish of choice

INSTRUCTIONS

Transfer and cut

Affix the silhouette pattern, found in Full Size Pattern Section No. 1, to the wood with temporary-bond spray adhesive. Cut the pattern to shape. Remove the pattern from the wood and sand as needed. Size the backer board to the dimensions indicated.

Glue the cut piece to the backer. Finally, apply finish of choice to the silhouette and let dry.