Popular Woodworking 2006-08 № 156, страница 80
After starting to remove the straight extensions on 20 of the 36 corner segments on the band saw, I realized that by mounting a few more registration pins on the back of my dado sled I was able to make quick work of another repetitive task. I love it when I can get double duty out of a jig. The secret to successfully joining corner pieces to flat pieces is keeping everything flush and square. Keep it flush with the little guys. Pull it together and up to square with the big guy. I ordered my 3/8"-thick top, with predrilled mounting holes, from a local glass fabricator. I separated the top from the base with black rubber bottle stoppers. When I can visualize a connection detail, but don't know how to accomplish it, I always head for those mysterious, arcane parts drawers at the hardware store. I'd almost settled for doorstop bumper replacements (have you checked yours lately?) when I stumbled on two drawers of cork and rubber bottle stoppers in every conceivable size. Eureka! To pick up on the machine aesthetic of Gray's side table, I through-bolted the glass to the base with stainless steel machine screws, finish washers, and cap nuts. to square with a couple hand clamps. The rubber pads on the long clamps allowed this kind of micro-adjustment. Finish Line I knew from day one that I wanted this to be a painted piece. Aalto was a fan of primary colors so I followed his lead with a cheerful cherry red. Your careful measuring and pattern routing in the early stages of the race will pay huge dividends when you near the finish line. A little wood filler, a little sanding, and you're good to go. I usually don't gush over a finishing product, but Krylon's motto of "no drips, no runs, no errors" is no idle boast. It's vital that the paint stays where it's placed when applying the finish in three dimensions simultaneously. Topping it Off You can use any 19"-diameter disc of material for the top (solid wood, stone, metal) but it really deserves a circle of glass to display the undulations of the base. Can't Help but Wonder Some day, someone's going to take a shot at the ribbon table in solid wood. My gut instinct tells me that this is impossible due to expansion/contraction considerations, but I haven't taken the time to evaluate the force vectors. It might work or it might explode. Do I have a volunteer? PW INSPIRATION The Aalto Stacking Stool ($149) and Eileen Gray Table ($398) are available from Design Within Reach, online at www.dwr.com. Prices correct attime of publication. VARIATION Images courtesy of Design Within Reach If you like the form but need a larger table, make two bases then top them with a long sheet of glass or other flat material. 78 Popular Woodworking August 2006 |
