Creative Woodworks & crafts 1998-09, страница 41

Fig. 1. If you don't have a carver's stand, a slotted piece of scrap Fig. 2, Temporarily place the head on the body and mark a line wood secured to your bench with a C-elamp will work almost as well. around the neck, then mark the center line of the body as well.

Fig. 3. Round off the corner of the body block.

Fig. 4, Carve a V-groove below the wings and arc the tail area so that the upper surface is convex.

Ipt

Fig. 5. Stop cut the circle of the eye and make a groove both in front of and in back of the eye.

Fig. &. Carve the facial details.

September, 1998