Creative Woodworks & crafts 2000-03, страница 22

ppi

SUPPLIES

Wood: hardwood of choice—one piece 3/4" x 8-1/4" x 10-1/4"

Tools: scroll saw with No. 9 blade; drill with 1/8" -Dia bit and countersink bit; router and router table with 1/4"-Dia. roundover bit Sandpaper, assorted grits Three No. 6 x 5/8" flathead wood screws Wood glue

Penetrating oil finish of choice Pan (large enough to hold the basket)

Victorian Jiean basket

Designed by Rick Longabaugh from the June 1996 issue

Patterns Located in Full Size Pattern Section No. 2!

INSTRUCTIONS

A note on stock selection and preparation Curly maple was selected for the basket shown, but any 3/4" thick domestic hardwood will suffice. Make sure your stock is free from defects such as checks or knots. Size your stock to 8-1/4" x 10-1/4" and finish sand the surfaces (start with 80 grit and progress to 220 grit paper).

Transfer the pattern and cut the shape

Copy the pattern and affix it to the stock. Using your scroll saw with a No. 9 (.053 wide, .018 thick, 11-1/2 tpi) blade, cut around the outer shape of the pattern. Make sure that the saw table is set square with the blade.

Drill the pivot and starter holes

Referring to the pattern and Fig. 1, drill the basket and