Creative Woodworks & crafts 2000-03, страница 66

^ Patterns S Located in 5 Full Size Pattern I Section 1 No. 2!

by George Ahlers Painted by Wendy Ahlers from the June 1996 issue

INSTRUCTIONS

Cut and drill the pieces

Cross cut and rip the pine stock to the correct dimensions. Following The Plar View Drawing, use a scroll saw or jigsaw, to shape the end pieces. Mark the positions of the two holes in the front piece and, using the drill and a 1-3/8"-Dia Forstner bit, bore the entry hole. Usinc a 1/4"-Dia. bit, bore the hole for the perch.

SUPPLIES

Hexagonal doll house shingles Galvanized finishing nails, No. 6d and 2d No. 8 x 1-5/8" galvanized decking screws Tracing paper

Graphite paper •• .

Stylus

Delta Ceramcoat acrylic paints: Black, Bright Yellow, Drizzle Grey, Kelly Green, Leaf Green, Light Ivory, Napthol Crimson, Royal Fuchsia, Straw, Tangerine, Ultra Blue

Wood: pine—one piece 1/4" x 8-1/2" x 11"

(for windows, door, and steps) Tools: scroll saw or jigsaw; drill with assorted bits including a 1-3/8"-Dia. Forstner bit; Stanley No. 9-1/2 block plane; hammer; nail set; file or rasp; staple gun and staples Sandpaper, assorted grits Clamps

Water resistant wood glue

2-1/4" length of 1/4"-Dia. dowel (for perch)

Assembly

Refer to the Exploded View Drawing for assembly. Nail the ends and sides