Creative Woodworks & crafts 2000-03, страница 71

J

Fig. 4. Gluing the smaller block to the main block subassembly. The smalier block is offest 5-1/2" down from the i>op of the main block.

Fig. 1. Labeling the two slot blocks will avoid confusion later on when the slots are cut.

Fig. 2. Setting up the table saw blade for a 7/8"-deep cut to cut the slots in the smaller block (B).

Fig. 3 Gluing and clamping the caps in place on the main slot block.

Fig. 5. The knife block has been cut to shape with a band saw—you'll need a sharp blade here!

Fig. 6. Rubber feet keep the knife block above any moisture that may be on your counter top.

Small slot block

Exploded View

(C) Slot cover

Main slot block

Slot cover