Creative Woodworks & crafts 2000-11, страница 52

*Ava/lable from Wildlife Intarsia Designs for $1.99 each plus $1.00 shipping and handling. To order or to receive a free catalog, call: 708-788-6455. **Available from Jim Dandy Products, call: 800-522-4717 for information.

continued on page 54

continued from page 50

Fig. 1. The design of the Japanese Koi works equally well as a segmentation project as seen in the main photo or as a more traditional intarsia project as shown here.

not rout where the fins will fit (marked in red).

the hole for the eye.

Wood: aspen or other light colored wood—one piece 3/4^:' x 8" x 18"; plywood—one piece 1/4" x 8" x 18" (for backer) and fifteen pieces 1/4" x 1/4" x 6" (optional - see accompanying painting tips sidebar). Tools: scroll saw with No. 2 blades; drill press with 9/16"-Dia. brad point or Forstner bit and 1/16"-Dia. bit; router with 3/8"-Dia. roundover bit; band saw (optional); sanding drums with 100 grit sleeves; 100 grit flutter wheel; finish sander and 150 grit paper

Temporary-bond spray adhesive

Sandpaper, assorted grits up to 320 grit

Masking tape

Double-sided tape

5-minute epoxy

Carpenter's glue

Fifteen X-acto blades (optional)

One 14mm glass fish eye. item No. K-14GE*

Airbrush or Visions AirPainter

Delta Matte Spray Varnish

Delta Ceramcoat acrylic paint in White, Tangerine,

and Gleams Pearl Finish Delta Acrylic Thinner, Pearl Luster Medium, and

Gloss Exterior Varnish Small paintbrush Wax paper

Painter's pad with turntable** (optional)