Creative Woodworks & crafts 2001-03, страница 25

Creative Woodworks & crafts 2001-03, страница 25

and the Envirotex Lite piece into the frame. You may need to do a little sanding on a 1" belt sandcr to make it fit. Use tho tack cloth again on these pieces to make sure they are clean.

Run a bead of glue in the rabbet of the frame and place in the cross. Run another bead of glue on tho back of the cross and place the Envirotex Lite pieco over it. Run still another bead of glue over the back of the frame and glue the back plate in place. Clamp the assembly and allow to dry. If the edges do not quite line up (it is difficult to exactly cut two separate pieces), use the 1" belt sander to gently sand the edges even. This should give you almost a seamless appearance between the back plate and the frame. Using the placement guideline on the base pattern, mark the placement of the drill holes and carefully drill the underside of the frame using the No. 2 bit and drilling to a depth of 1/2". Note: if you set your drill any deeper, you will come through the bottom of the frame and ruin your cross! Sand the base until smooth.

Run the tack cloth over all surfaces and then varnish the frame and base. Apply two to three coats of varnish, allowing it to dry thoroughly in between applications.

Using a Phillips head screwdriver, screw the frame to the base from the underside.

Enjoy your beautiful candle holder!

Run a bead of glue in the rabbet on the frame

Frame

Glue the back plate in place behind the cross and Envirotex Lite piece

Place the cross and Envirotex Lite piece into the rabbet on the frame

Back plate

Upright Assembly Drawing

GREAT SCROLL SAW PATTERNS, PRICED RIGHT!

Highly acclaimed pattern artist Sheila Polhemus has designed lots of beautful scroll saw projects. Many, like Noah's Ark (shown above) have proven to be top craft-show sellers!

Call or write today for a

FREE catalog... you'll be glad you did!

Call (301) 843-7380 or write to JP Woodworks, 3000 Charleton Ct., Waldorf, MD 20602.

Rose Swag

DISCOVER ENVIROTEX!

What is Envirotex? It's a clear, durable substance that protects and beautifies wood or almost any surface. Usually, just one

coat is required. You've probably seen it as a clear protective coating on table, bar, or counter tops, and in many other applications. This beautiful Rose Swag, designed by Joan West, was featured in the August 2000 issue of Creative Woodworks & Crafts. It was made from wood and Envirotex, which was colored with easy-to-use dyes that we also sell (see below). This popular Corner Box, also designed by Joan, appeared in the June 2000 issue. It shows how clear Envirotex can be used with great effect to enhance your scroll saw projects.

Special: Order the Gallon Kit of Envirotex Lite for $49.99 plus shipping and receive FREE the two issues of Creative Woodworks & Crafts that feature the two projects shown above. Also available in smaller sizes.

Pigments available in 8 colors/1 oz. bottles - $4.59 ea.

Dyes available in 6 colors/1/2 oz. bottles - $4.39 ea.

Order Toll Free: 1-800-654-6114, or order from our website at www.alpineimport.com Alpine Import, 7106 N. Alpine Rd., Rockford, IL 61111.