Creative Woodworks & crafts 2002-09, страница 49
ALWAYS SI WtlOkSS, j&Wuti^'TliWs i m \ n /I m m * * c . National Artcraft Co. 7996 Darrow Road • Twinsburg, OH 440?7 Phone: 888-937-2723 Fax: 800-292-4916 e-mail: sales@nationalartcraft.com Web: www.nationalartcraft.com Step 17. Next, drill a corresponding l/4"-Dio. hole in the driftwood. Position the small pectoral fin as indicated on the pattern and glue it in place using the CA glue. Mount the Yellow Tang onto the driftwood using a l/4"-Dia. piece of brass and some 5 minute epoxy. Enjoy your creation, but do not leave it too close to the water, it might swim away! Metal Metal MAB #3 up to W MAB #5 up to Vt" ARTISAN SCROLL SAW Z^L^DZO Part Number Teeth per inch Corian® Hardwood Acrylic AB #2/0 AB #2 to 1/4" up to W AB #7 up to W up to W AB #9 up to 1" up to 1" AB #12 to 2" New Assortment Package - Contains 2 each of every blade listed above, a total of 18 blades for only $9.95 For a complete listing of all Artisan products visit our website at: www.bgartforms.com or call 888-717-4202 BG Artforms, 2189 Philip Dr., Bensalem, PA 19020 Step 7. Dry fit the pieces together and sand as necessary to obtain a tight fit. Step 8. Wet sand the edges of the Yellow Tang using a craft stick and 220, 320, 400, and 600 grit wet/dry sandpaper. Step 13. Use a router and the decorative bit of your choice to add a profile to the edge of the base. Hint: Mr. Solid Surface used a 30 degree chamfer bit to get the desired look he wanted. AB #4 tO Vf up to W up to W AB #5 up to W ORDER DIRECT FROM "MR. SOLID SURFACE": FINALLY ONE SCROLL SAW BLADE THAT EASILY MAKES DUST OF... HARDWOODS, CORIAN® & ACRYLICS WITH EASE! Win the war against sanding and obtain a satin smooth cut for all your Hardwood, Corian and Acrylic needs using the imported skip tooth blades listed below. All Artisan scroll saw blades are $6.95 per dozen, plus $1.50 shipping &handling per order. Visa & MasterCard accepted. |
