Creative Woodworks & crafts 2003-03, страница 22

Creative Woodworks & crafts 2003-03, страница 22

Pattern Located in Full Size Pattern Section No. 1!

by Darin Liles of Shirley, AR

Step 2. After cutting out center of body, cut and fit the eye and mouth to the body. Lift eye and upper mouth 1/4".

INSTRUCTIONS

Step 1. Trace dolphin pattern onto tracing paper. This will allow you to make the best use of the grain. Start with the center of the body which is made from ash. Use carbon paper to transfer the pattern and then cut out.

Step 3. Cut and fit the tail section to the body using 1/2" material.

SUPPLIES

Wood: ash—one piece 3/4" x 12" x 12", one piece 1/2" x 10" x 10"; curly maple—one piece 3/4" x 10" x 10", one piece 1/2" x 5" x 5"; walnut—one piece 3/4" x 2" x 2"; plywood—one piece 1/4" x 12" x 12" Tools: scroll saw, FD No. 5 blades, oscillating spindle sander, palm sander with assorted grits, mopping wheel 220 grit Sandpaper, assorted grits Wood giue Carbon paper Tracing paper Hanger of choice Clamps Danish oil

Clear coat of choice

12 • Creative Woodworks & Crafts March 2003 Base