Creative Woodworks & crafts 2004-01, страница 51

SUPPLIES

Wood: qpinvt—one piece ||4" thick (sizes not specified since screws were usedfor ;hi$ ' projec';. one piece 1 m'tfticfc ^; x4-i/2"x&" (for ear shim):

k cter/y--o;^;ie Sfm^-.bteiefe {<©!• [ the iris' of oyes); olijn^-- .

one small piece (for the pupils); ;_: plywood- ope p:ece-3/4"x7" ^: x 10-1 IT (for the head backer), i small pieces l/S" fftick (fdr efe . shims)

Toots: $cr<5il.$aw wi'm assorted . . blades: drill press with assorted, sanding drums: 3/8"-diameter ■-,'. plug cufte}- ana drili bit: sapding. mop with >2&grit abrasive: finish sander wi;h assorted e/rif ! abrasive paper 5-minufe epoxy Carpenter's gluo fiailpoH pen • .^{;; :} ; ^; '.

While transfer paper' ., Tracing paper* Masking, tapf Wax pape^r C-clamps

Hard-backed sanding block Sandpaper, assorted grits Hanger

Mafte spray or finish of choice Gloss varnish Walnut stain Paintbrush

Painters#ad {opfioriaf^,i ' •

⁴Available from Dick Stick Art

Materials, 1800-828-4548}; . .' . •

www.dickbiick.com.

^4,4 Available from Jim Dandy

Products. (800-522-4717),

,ww.w:j!ri)dandy;com

For a free catalog of Robert J.

Hfavacek's hfdr$ia pa?te.rr>$:c.al.l:'

(708-788-6455!, or write: Wildlife

Intarsia Designs. P.O. Box 1246.

6Q54& or visit

Fig. 1. The project parts have been traced onto the wood.

Fig. 2. Removing burrs with a sanding block.

Fig. 4. Adjoining pieces are used to create new cut lines.

Fig. 3. Sanding for a smooth, 90° edge.

rnmrnmfm^mMm^m

Fig, 5. Cut the pieces to shape just outside the pencil lines.

Fig. 6. Sanding to the pencil line,

rawaoaaoxtt

Fig. 7. Hold the parts togethei with masking tape.

Fig. 8. The two lower eye pieces were glued together prior to cutting

mm

:Jm % | *

Fig. 10. Tracing the eye assembly's outline onto 1/8" plywood.

Fig. 9. Marking the face for location of the eye assembly.

Fig. 11. Cutting the 1/8" shim to shape.