Creative Woodworks & crafts 2004-01, страница 55

Back home, take a piece of the Once you have the veil cut just of the underlying color. You don't

veil material and place it on the right, remove it from the fish. Turn want to see green, but a little red

trout body. You want to make cer- it over and lay it on a piece of paper, doesn't hurt. Don't spray on the

tain that the ovals run up and Lightly spray the veil with the spray belly or much below the edge of

down, not the long way of the adhesive, being certain to cover all of the veil. Spray the cheek plates and

body. Cut to size and shape. The it. Remember, you want to spray the gill covers with a nice silver tint,

veil should lie on the body from just side that goes on the fish! Don't spray Paint over the back of the head,

below the upper edge of the belly the carving, either; only the veil. Don't paint over the rays on the fins,

white (covering the red and the Now, carefully lay the sprayed veil but a light mist on the dorsal and

green color) up to the back of the back on the carving in the same upper half of the tail fin is OK. Let

trout. Stop the material short of the position you had before. You can pick the silver dry thoroughly,

top of the Pack; trout do not have if up and move it around, but try to

on re fin^h<rd piece. down to a lower^setting then you nor-

i " v , T

mm

Ultftlt gMUMi

^Lposstfefe, wfitb unmatched temoi

IIIPIIppfp ^§1

www.flexcut.com

Flexcut Tool Company Inc. 8105 Hawthorn Drive Erie, PA 16509 800-524-9077 Made in USA