Creative Woodworks & crafts 2004-09, страница 63

if i V-

Fig. 6. You can also use a mop wheel at 240 grit to help smooth out your roundings.

Fig. 10.1 applied a natural finish, and followed it with a matte finish.

if|Pif;rj

Fig. 7. Pieces sufficiently rounded over and assembled

Fig. 11. Place the project on the 1/4" plywood and trace its outline.

Fig. &. Cut the foot from 1/2" pine.

Fig. 12. Cut the backer at a 30° angle

Fig. 9. Place the assembled arm and leg on the body for a dry fit. Fig. 13- Glue and clamp the backer to the project. Note the use of

tracing paper scraps to protect the finish and prevent scratching.