Creative Woodworks & crafts 2005-09, страница 55

Cut and tit all the masts, sails, and flags. I preferred to start from the right and work my way to the left, sanding and gluing as i went. Because this piece is intricate, you may need to make minor adjustments as you go.

Edge glue the rope ladder overlay to the water and to the wheel, using a shim to keep it level. Allow to dry.

When the project is completely dry, turn the wheel over. Rub glue into all seams and let dry. Sand the back smooth. Turn the piece over and finish sand the front by hand. Apply two coats of finish to the back, and let dry. Apply three coats of finish to the front with a light sanding between coats. Let dry. Attach a hanger, and enjoy your work of art. Happy cutting!

For questions concerning th/s project, or to receive a free catalog of more patterns by Robert T. Letvinchuck, write to: Against The Grain WoodArf, 382 E. 1st St., Fond du Lac, Wl; or, visit us on line at: www.againstthe-grainwoodart.com

CHECK OUT

CREATIVE WOODWORKS & CRAFTS NEW FORUM ONLINE TALK LIVE WITH MANY GREAT DESIGNERS FROM THE MAGAZINE!

VISIT

WOODWORKSANDCRAFTS.COM

TODAY!