Creative Woodworks & Crafts-059-1998-Fall, страница 61

Wood: birch plywood—1/8" x 9" x 12"* Tools: scroll saw with No. 5 blades; drill with 1/8" bit Rotozip SpirAcut spiral saw with 1/8" sabrecut bit* Temporary-bond spray adhesive Sandpaper, assorted grits Finish of choice

Plexiglas in Blue, Green, White and Yellow* Tacky glue

*The plywood, Plexiglas, and Rotozip SpirAcut are available from Steebar Corp., P.O. Box 980-WC-19, Andover, NJ 07821-0980, (973) 383-1026.

Fig. 1. Use the Rotozip SpirAcut spiral saw (or your scroll saw) to cut out the Plexiglas pieces

Fig. 2. Similar to intarsia, once a Plexiglas piece is cut, it can be used as a template to mark an accurate cut line on the adjoining piece.

Fig. 3. Affix the Plexiglas to the rear of the pattern piece.