Popular Woodworking 2000-12 № 119, страница 35

19 1/4"

See detail of CD drawer

See detail of foot construction

3/4"-

Magazine storage boxes

³/8"

15 ³/4"

7" 3/4"

7"

³/4"

16 ¹/4"

59 ³/4"

Stop block for magazine storage box, nailed in place

See details of top edge ' ³/8"

13"

³/4"

13"

³/4"

13"

³/4"

13"

³/4"

4"

³/4"

13 ¹/4"

³/4"

13 ¹/4"

59 ³/4"

Biscuit the Panel

Clamp a straightedge to the marked line indicating the bottom of the shelf. Place the joiner up against the straightedge to make the cut. Cut slots in the shelves by placing them on a flat surface and repeating the process, indexing the joiner and shelf on the same surface.

Spline-Cutting Jig

Use a two-piece jig shown above. Hold the door parts at 45 degrees and gently push them through the saw blade, leaving a saw cut '/i" deep.

Clamping the Doors

When you have a door glued together, place cauls on each corner.The groove in the back will evenly distribute the pressure from the rope on the joint.The curved indexing surface ensures that the clamp always provides pressure at the same point on the joint.

www.popwood.com 53