Popular Woodworking 2002-12 № 131, страница 73
The lower doors are simply a raised-panel style door with a half-lap center and a Begin the upper glass door by milling the lumber according to the cut list and bead detail at the lap.A 1/4"-wide x V2"-deep groove in the stiles and rails hold the cutting the mortises in the stiles, leaving a minimum 3/8" interior shoulder. Next, cut raised panel. a 5/16" x V2" rabbet on the interior, inside edge of all four door pieces. Make the face shoulder cut so that the blade just clears into the rabbet. Next, change the fence location by 5/16" by moving it closer to the blade.Then make the second shoulder cut, creating an offset of the cuts. With the fence at the same location, cut to create the edge shoulder. Remove the With the joints finished,you are ready to assemble this door frame.As you can see, cheeks and the shoulder, remembering that there are two different cheek heights the rabbet for the glass is created, and the joinery is professional. PW to cut. |
