Popular Woodworking 2005-06 № 148, страница 33
as shown below. Cut. Remove the first piece and slide its mate to the right, the slot over the key. Cut again. Step and cut until all the slots are completed. PW
In production mode, you can cut more than one board at a time. Stack the sides and cut the pins across an end. Then hold the ends against the sides to continue the cutting sequence across them.
If the joint layout begins with a pin and ends with a slot, then all four parts are identical, and all can be cut at the same time.
If the layout on a board begins and ends with a pin, the mating piece must begin and end with a slot. To align the work for the beginning slot, butt the piece against its mate.
CIRCLE NO. 124 ON FREE INFORMATION CARD.
Dovetail your next drawer - in less than 10 minutes...
only with the Keller Dovetail System.
All other jigs require endless test cuts and wasted wood.
The Keller Dovetail System is very different: it is easy, quick, accurate and versatile.
Cut unlimited widths. Classic and variable spacing. Angled and curved dovetails. Box joints. Projects from jewelry boxes to entertainment centers. 20-yr warranty.
VIDEO: $8.95 + $2 P/H
KELLER & CO. Dept. P55 1327 T Street, IVtakiiivi, CA 94952 (800) 995-2456 (707) 763-9336
The Keller Dovetail System Simply the best.
CIRCLE NO. 153 ON FREE INFORMATION CARD.
CIRCLE NO. 128 ON FREE INFORMATION CARD.
IS THE ONLY ONE YOU NEED!
Excellent for both ripping and crosscutting in solid wood and man-made board
Massive (.105" Thick!) tool- steel plate with copper plugs practically eliminates vibration
Precision-ground D-10 carbide teeth
10x40T (ATB) For: Wood/Laminate/Plywood
High Performance Cutting Tools
For a Dealer Nearest You Call 1-800-445-0077 Visit Our Website www.amanatool.com
CIRCLE NO. 102 ON FREE INFORMATION CARD.