Woodworker's Journal 101-Projects-for-Woodworkers, страница 34

Woodworker

T i,

... ~fl«ih

7—Xif

DtT/ML A

i—if-r

7 v»

- ,/4 -

D>e.TAiu S>

3%*

CETAi L C-Diau PK^wie

stock with the outer edge rounded olT as shown in Detail C. The opposite edge is given a 54 x W rabbet to provide a recess for the plywood movement mount (9). Each of the eight pieces of the face frame is cut to a length of and mi-tered to 6754 degrees. Again it is advisable to cut pieces from scrap first, and fit them together on a flat surface. Poorly fitted joints will most cer

tainly spoil the overall appearance of the clock-Each piece must be given a % x 54" stopped groove for blind splines. After careful sanding, assemble the frame with glue and splines. Fasten the completed frame to the case with six [" #6 flat-headed screws through the rabbeted edge and into the case, and two 154" # 7 flat-headed screws through the upper door frame (11).

27