Woodworker's Journal 101-Projects-for-Woodworkers, страница 43

Woodworker

ing the arms and backrest. After the cabinet has been glued in place, the % x %" drawer glides are added. The drawer is made to look like two drawers using the details of Figure 6. The drawer bottom is Vt" plywood or hardboard set into dadoes in all four members of the drawer. The bottom dadoes are set W up from the bottom edge of the drawer sides.

Finish sand the entire bench giving special attention to the arms and backrest, and rounding the top surfaces slightly. Apply your preferred finish. We used a sealer that was sanded lightly, followed by an oil-base stain, Plymouth Maple by Sears. This stain was covcrcd with two coats of polyurethane and the final coat was rubbed with rubbing oil and pumice to give a satin finish.

36