Woodworker's Journal 1993-17-5, страница 53

edge through the blade. About four or five passes will remove the waste material. With the notch cut. layout the dovetails on each end and cut them out with a dovetail saw and chisel.

Assemble the Center Stretcher: Using the center stretcher dovetails as templates, scribe the dovetail profiles on the top edge of the aprons, then chop them out with a chisel. Once cut, add glue to the mating surfaces and assemble.

September/October 1993

Drawer Guides. Runners and Cleats: Cut the four runners (F) to size, including the '/4 in. by '/■» in. tenons on each end. To assemble, apply glue to the tenons, then angle the runners in the stretcher grooves and slide them into position. Use a framing square to check that the runners are square lo the bottom stretchers. Allow to dry.

Now. cut each of ihe four drawer guides (G| to fit snugly

53