Woodworker's Journal 2009-33-1, страница 46

Bringing it All Together

Laminate the plywood pieces together to make the headboards. Use a roller to spread the glue, and then stack and clamp the pieces using scrap plywood cauls to spread the pressure. The final step is to add the edging (see photo directly above).

Assembling the Bed: Despite its large size, there is some very

Set all the cantilevers in place, and then align and screw them to the base. When you're done, lean the base against a wall, out of the way.

Assemble the frame upside down on the floor. Slide some cardboard underneath the corners so carpet fibers don't get caught in the joint when the FlipBolts are tightened.

46

February 2009 Woodworker's Journal