Woodworker's Journal fall-2009, страница 35
Shop Door Elevation (Front View) -30"- -21V- 41/2l'r"- 41/2" 4/2" 80" 9/2 8/2" / \ 1 K A' Center the 3/4" x 2/2" x 2" mortise across width of rail or mullion. N / 1 K - 9/8" - -v Rout 3/4"x 2/2" x 3" mortises in stile edges and rail ends. 75/8" 24" J 23/4" Rout 3/4"x2"x 3" mortises in stile edges and lock rail ends. Glue center 24" tenon only. 24 Middle mortise is centered across width of lock rail. 21/4" 31/2" _ Glue the upper tenon only so wood movement is directed down from that point. © Door Exploded View
NOTE: These dimensions are based on the use *Work with pieces 4" to 6" longer than final length; trim excess after assembly. of Infinity bits. If you use Freud bits, rails and ... If you use Freud bits, the panels must be 13/s thick; start with 8/4 stock. NOTE: These dimensions are based on the use *Work with pieces 4" to 6" longer than final length; trim excess after assembly. of Infinity bits. If you use Freud bits, rails and ... If you use Freud bits, the panels must be 13/s thick; start with 8/4 stock. mullions must be slightly longer. Fall 2009 35 |
