Creative Woodworks & crafts 2001-06, страница 55

holes in the center of each seed pod end.

Fig. 4. Contour the taped sections of the duck.

Fig. 5. Round over the cattail seed pods.

Fig. 3. Glue the pieces together.

. Add the details.

Fig. 9. Cut out the backers.

Fig. 12. Align the back edge of the Plexiglas with the base, clamp them together, and allow to dry overnight.

Fig. 13. Transfer the pattern to the Plexiglas, aligning the back edge of the pattern with the base.

Fig. 14. Bore the 1/8"-Pia. pilot holes through the base for the lamp hardware and mounting screws.

continued on page 56

IB * Creative Woodworks S. drafts June 2001

Fig. 10. Glue the intarsia pieces to the backers.

Fig. 11. Spread a thin, even coat of Weldbond glue onto both the Plexiglas and the wood.

smmmmwm«iimgBimm