Creative Woodworks & crafts 2002-09, страница 55

mm iftn'ffiiirum n<i .......... a

SUPPLIES

Wood: mahogany—one piece 1/2" x 6-7/8" x 6-7/8" (for the platform), two pieces 1/2" x 6" x 6" (for the roof pieces), two pieces 1 /2" x 1 -3/4" x 3" (for the gussets); white oak—two pieces 1/2" x 3" x 8" (for the front and rear walls), two pieces 1 /2" x 3" x 6" (for the side walls), four pieces 1/2" x 1-1/2" x 7-3/8" (for the rails), one piece 1 /2" x 2" x 2" (for the feed ramp); walnut—one piece 1/2" x 1" x 2" (for the roof lock)

Tools: table saw; scroll saw with No. 5 reverse tooth blades; drill with 7/16"-Dia. and l/2"-Dia. bits; router

with 1 /2" straight and roundover bits Temporary-bond spray adhesive Sandpaper, assorted grits Titebond II, yellow water resistant glue Super glue

7/16"-Dia. x 4" long dowel (for the roof lock) Brass pin, l/8"-Dia. x 1/2" long (for the roof lock) Plexiglas, two pieces 1/8" x 1-7/8" x 4-1/4",

transparent (for the windows) Heavy duty rubber bands General Finishes Outdoor Oil in clear

Ud"'Dia. brass pin

45 degrees

Roof Assembly Drawing

7/16"-dia. dowel

Note: brass pin should be lined up in the one o'clock position when key is finally assembled

Rear gusset

Front gusset

Assembled face view Unlocked

Front

Assembled face view Locked

Roof Lock Petail Drawings

Feed Ramp Detail Drawing

1/2" thick white oak

Creative Woodworks. & Grafts. Sspisnto 2002 • 55