Creative Woodworks & crafts 2004-08, страница 16

1

m

Kitty Dish

Pattern Located in Full Size Pattern Section No. 2!

-:'Jl \ ^by Sheila Bergner of Toys in the Attic

SI

Siffaji^iSi

ian

gw

!i

...

SUPPLIES

Wood: walnut or wood of choice—one piece

1" thick x 9" x 34" Tools: scroll saw with 5R reverse tooth scroll saw blades; drill with 9/64"_;drill bit and countersink bit; router with roundover bit Temporary-bond spray adhesive Sandpaper, assarted grits ' Clear packaging tape Eight 1-1 /4" x No. 2 deck screws Polyurethane varnish (in finish of choice) White marking pencil (if using walnut) 2 pet dishes (approximately 5" in diameter)

Step 1. With the white pencil, draw a rectangle that measures 7-1/2" x 14" long.

INSTRUCTIONS

Please read all instructions before you begin!

Copy your pattern so that you may retain and reuse the original. You may want to take it to a local printer or office supply store for the larger pieces. Spray a thin layer of glue (or another temporary adhesive) on the back of the pattern. Let this sit a minute or two and allow it to tack up. The surface should feel tacky, but not too sticky—much like the feel of masking tape. Press the pattern piece to the walnut or wood of your choice and smooth out with your hand.

Creative Woodworks 3. Crafts August 2004 • 18

Step 2. Apply the base template pattern to the edges of the rectangle.