Creative Woodworks & crafts 2005-11, страница 63

SUPPLIES

Wood: pine"—1-1/4"-thick (for parts P and Q); 1 "-thick(for parts N, O, R, S, and feathers 1-15); 7/8"-thick (for feathers 16-32 and 52-60): 3/4"-thick(for parts A-M, and T, and feathers 33-51 and 61-73); 1 I/16"-thick (for parf U): 5/8"-thick (for feathers 74-91); l/2"-thick (for feathers 92-103); 7/16"-thick (for part V); lauan— one piece l/4"xapprox. !5"x 17' (for backer board); assorted spacers and shims Tools: scroll saw with No. 2 and No. 2/0 (or smaller) blades; band saw with 1 /2"-wide x 80-grit sanding belt (or spindle sander); palm sander with 100-grit sandpaper; belt sander or planer (for reducing thickness of wood); drill with 15/64" drill bit; 2" spring clamps Graphite paper Tracing paper Wax paper Wood glue

1 /2"-wide blue painter's tape Axle peg with head, 15/64"-Dia. (one) .07 or .09 mechanical pencil Wet/dry 400-grrt sandpaper

Tole brushes: No. 1 round, No. 8 round, and 1-1/2" flat

Paint thinner (for cleaning brushes)

Minwax oil-based high gloss polyurethane (1 pint)

Minwax stains (or other oil- or water-based stains of choice): Bayou Green, Black Walnut. Dark Walnut, Ebony, Golden

Oak, Ipswich Pine, Mustard, Sedona Red, and Special Walnut (1 pint each) Rustoleum satin while (! pint) Sawtooth hanger

'Specific sizes for each thickness of board are not provided because the grain of the wood will determine the actual amount needed.

continued cn page 64 Creative Woodworte £ Crafts November 2D05 • 63