Popular Woodworking 2007-06 № 162, страница 24

single dovetail there is no hand work to complete after the band sawing. The resulting tail fits into the socket.

Now cut the mortises for the drawer runners and drawer kickers into the front rails. The mortises need to be offset to work with the

⁷/8"-thick rails. Cut the mortises for the runners V4" from the top edge of the rail; those for the kickers are V4" from the lower edge of the top rail.

Add glue to the mortises and tenons for the front and back assemblies. Don't glue the sides

The tenons on the sides and back rails are cut in a two-step method, the first of which is with the material flat on the tabletop. The same setup is used for the twin tenons on the lower front rail, but you cut the material on its edge.

Drawer profile

Top is ³/4 "thick wrapped with ⁷/8"x⁵/8" moulding

Divider in

¹/2" x ³/8" dado

⁵/8" rabbet for bottom

19³/4"

27%"-

3V2"

—

■1V2" dia. ^7/8"

12^/8"

11³/8"

1%"-

-28" —

— 31³/4 —

Elevation

12³/4"-

12³/4"-

-9^/8"

- 12⁷/8" Profile

10

Popular Woodworking June 2007