36 - Miter Trimmer, страница 17
FEATURE PROJECT ANGLED BED SUPPORTS WORKPIECE AT A 45° ANGLE TRACK GUIDES HORIZONTAL SPACER VERTICAL SPACER ® SIDE GROOVE PROVIDES CHANNEL FOR ADJUSTABLE CLAMP HEAD EXP10PEP VIEW OVERALL DIMENSIONS: &%>" H x 17%" L x 3" W #& X VA" Fh SHEET METAL SCREW HOLE CAPTURES CROSS-DOWEL BETWEEN SIDES OF MITER TRIMMER A. Position Workpiece. With the mitered end of the workpiece flush with a track in the top edge, a clamp head presses it against an angled bed.
Hardware • (24) #& x 1%" Fh Sheet Metal Screws • (1) V2" x 3" Cross-Dowel* ® (1) %-20 x 11%" Threaded Rod • (4) %" Nylon Lock Nuts ® (2) #6 x 1" Rh Sheet Metal Screws ' (1) %" x J'/2" Fender Washer ' (1) %" Flastic Wing Knob "Cross-dowel is cut from round metal bar stock, then drilled and tapped for threaded rod, refer to page 20. NOTE: SIDE REMOVED FOR CLARITY ADJUSTABLE CLAMP HEAD ANOLED BED MITERED WORKPIECE TRACK GUIDES PLANE ACROSS & WORKPIECE BLOCK PLANE ADJUST BLADE FOR SHALLOW CUT B. True Up End. After adjusting the blade in a block plane for a very light cut, slide it along the track and across the workpiece to true up the end. No. 36 ShopNotes 17 |
||||||||||||||||||||
