Woodworker's Journal fall-2008, страница 24

2 Bottom (1)

To ensure evenly spaced and properly registered holes for the shelf support pins, the author used a boring jig. readily available via mail order catalogs.

6 Cabinet Back (1)

The back rabbet is 1/4" wide by 1/2" deep.

7 Countertop (1)

8 Countertop Build-up (1)

9 Hardwood Edging (1)

10 Melamine Hot-melt Tape (1) 1/32", Trim to fit

Length is determined by number of storage cabinets desired.

The groove for the bottom is 1/4" deep.

Exploded View

(Section View)

Counter Details

(Bottom View)

Attach the countertop to the cabinets with screws driven up through the spacers and rails (pieces 3 and 4). Be sure to hold thern short of the counter's finished top.

MATERIAL LIST

1 Sides (2)

Tx Wx L

3/4" x 23 7.1" x 34-V

Side

(tnside View)

(Top View)

ffajj Spacer location

24 EASY-TO-BUILD STORAGE CABINETS

Subscribe now at www.wpodworkersjournal.com/digitaledition