Creative Woodworks & crafts 1998-09, страница 61

SUPPLIES

Wood: 5-ply plywood—two pieces, 1/4" x 13"x 5-1/2" (for the wings, elevators, and rudders) and one piece, 1/4" x 5" x 1-1/4" (for the pilot); 3-ply plywood—two pieces, 1 /32" x 2-3/4" x 1-1/4" (for the propeller blades); birch—two pieces, 3/8" x 3/8" x 3/4" (for the propeller hubs) Birch doweling: 3/16"-Dia —twelve 3-3/4" lengths (for the wing struts); eight 3/8" lengths (for the elevator and rudder separator peg joiners); four 1/4" lengths (for the stand peg joiners); 1/4"-Dia.—two 14-1/8" lengths (for the lower struts); two 5-3/4" lengths (for the upper rudder struts); two 7" lengths (for the upper elevator struts); 3/8"-Dia—two 4" lengths (for the motor-propeller mounts); four 1 -1/4" lengths (for the elevator and rudder separator mounts); eight 1/2" lengths (for the stand pegs and upper strut holders) Tools: scroll saw with No. 5 blades; drill with 1/16", 11/64", and 1/4"-Dia. bits; screwdriver; hand held orbital sander with 120 and 180 grit abrasives ScrollSariders* in 120 and 180 grits (1/2" wide) Two No. 4x1" brass round head wood screws

(for the propellers) Four No. 4 washers One eyehook One snap swivel Wire hanger Tack cloth

Exterior latex paints in Black, Brown, and White

Graphite transfer paper

Sharp pencil or awl

Double-sided poster tape

5-minute epoxy

Titebondor other glue

Paintbrushes of choice

Rubber bands

Masking tape

Toothpicks

"To order ScrollSariders, or to find out about other Crawford-Adams designs, contact Crawford-Adams Enterprises, P.O. Box 1086, Dept. WF, Verdi. NV89439. (702) 345-1660.

v iji

ifjgip

vt ^

t&WM'®

S-VK-.S-vi'

ilM

: V*

Mia