Creative Woodworks & crafts 2002-08, страница 53

MATERIALS

Wood: Baltic birch plywood—one piece 3/4" x 10" x 24" (for the backer], three pieces 1 /4" x 4" x 9-3/4" (for the shelves); soft maple or basswood—-six pieces 1/8" x 1-1/4" x 3-1/4" (for the shelf brackets), three pieces 1 /8" x 1/2" x 10" (for the shelf fronts)

Look for this bonus shelf pattern in Full Size Pattern Section No. 2. Construction is pretty straight forward, there is no marquetry here, just cut the backer to shape and lay out the desired letters (provided) to spell out anything you want. The shelf dadoes are the same as for the Hot Rod Shelf and of course the shelves are constructed in exactly the same way as the others.^

uniiiiiu. ^mmmma^^^^mmmmmm

§m.......m .....m......i..........mm

Hot Rod Shelf Dado Layout (and Bonus Flame Pattern)

BONUS PATTERN!

*«reHRSH»BB

Creative Woodworks & Crafts August: 200S * 53

SJ1 , ,. . -y,!.,./ ^,,, , ■

1/4" wide x 1/4" deep dado to receive the shelf assemblies (typ)

Bottom

11-5/6"

6-5/8"

_L

1-5/8"

Marquetry Cutting Drawing

Adhere pattern to the wood

Tilt saw table approx. 4 degrees to the left (see detail below)

_•

Marquetry Cutting Detail