44 - Grinding Station, страница 17
GRINDER BACK SUPPORT ARM TRAY SUPPORT BOTTOM RAIL BOTTOM FRONT BACK BOTTOM CUP HOLDER®. EXPLODED VIEW OVERALL DIMENSIONS: (13"Hx20"WX13"D) NOTE: _ USE LAG SCREWS EDGING (L) AND WASHERS TO MOUNT GRINDING STATION TO WALL EDGING (N) WORKLIGHT ©SHELF TOP RAIL © TABLE (K) CLEAT FRONT^ CROSSPIECE ^ UPRIGH' QUENCHING CUP KEEPER STRIPS SIDE 14" DRAWER SLIDES <5 FALSE FRONT Frame A Support Arms (2) B Uprights (2) C Top/bottom Rails (2) D Front Crosspiece (1) E Rear Crosspiece (1) F Tray Supports (2) Sliding Tray G bottom (1) H Keeper Strip Back, Table, & Shelf I Back (1) J Cleats (2) K Table (1) L Edging M Shelf (1) N Edging 11/2x5-17>/2 11/2x3-19 V/2 x 3 - 24 3/4 x 4 - 221/2 3/4 x 2 - 22}/2 11/2 x 21 - % Hdbd. 5% x 26 - % Hdbd. 15/52x6Lin.Ft.-5/4Ply. 21 x 141/2 - '/4 Hdbd. 3/4 x 13/w -13 16x25 - 3/4 Fly. '/2 x 3/4 (5 Lin. Ft.) 31/2 x 22 - 3/4 Ply. V2 x 11/8 (3 Lin. Ft.) Drawer O Front/Pack (2) F Sides (2) Q Bottom (1) R False Front (1) S Cup Holder (1) V2 x 2?/a -191/2 V2 x 23/& -14 131/2 x 191/2 - ?/4 Hdbd. 5/4x2»/ie-207/3 4x6 -3U Ply. You can make all the parts for the Grinding Station from (1) 2x12 piece of Douglas Fir (eight feet long), one sheet of3U" Baltic Birch Plywood, one 'U sheet of V4" hardboard, and a 24" x 48" piece of plastic laminate. Note: The worklight we used for this Grinding Station is available from W. W. Grainger for $33.44. To order, call 515-266-3460 and request Part Number 4PD33. Hardware ° (1 Pr.) 14" Full-Ext. Drawer Slides ° (2) #8 x V2" Panhead Screws o (2) #8 x1%" Panhead Screws ° (4) #8 x 3]/2" Fh Woodscrews • (8) #8 x 2%" Fh Woodscrews • (30) #8 x 1%" Fh Woodscrews • (17) #8 x 3/4" Fh Woodscrews • (1) 1" x1" - 4" Aluminum Angle C/e" Thick) • (1) 2"-Dia. PVC Pipe (1V2" Long) • (1) 2"-Dia. PVC End Cap • (1) 3"-Dia. x 2"-Dia. PVC Coupler To order a kit that includes all of this hardware, call 800-347-5105. Note: Worklight not included. Kit No. 6344-100.............$33.95 No. 44 ShopNotes 17 |
