92, страница 26
build these functional she See Shop Short Cuts on pap for some tips on building ■ shelves and adding the L-hc The L-hooks are used to hang shelves on the pegboard.
Now, the fun part of orga-^ ing your shop begins. Once th done, you can put the one-w workshop to good use on all future woodworking projects. &
No matter how much storage you have, it doesn't take long to fill up the space. Here are some storage options you can add to your workspace. They range from a tall storage cabinet to small, portable pegboard shelves.
Tall Cabinet and Cap. To finish out the workshop, I added the tall cabinet and built a cap for it, as shown in Figure 11. A few screws secure the cap in place.
Valance and Pegboard. With the tall cabinet in place, you can add the final valance piece. You'll build it just like the one before, using the dimensions shown in Figure 11.
And you can complete the peg-board storage by building two more panels, as shown below. These will fill in the space between the panel you built earlier and the tall cabinet at the end of the workbench.
Permanent Shelving. At this point, all that's left to do is add
some additional shelving. I started with the fixed shelves shown in the photo above. They're a quick and easy solution for more storage space. Figures 11 and 12 show you how to put them together.
Once the edging is attached, use woodscrews to fasten the shelves at each end to the adjacent cabinets. (For added strength and to help prevent sagging, it wouldn't hurt to put a few screws through the back edging into the wail studs.)
Pegboard Shelving. If you look at the inset photo on the right, you'll see a handy storage option for the pegboard panels. The great thing is, they're adjustable.
Figure 13 below shows you everything you need to know to
riin FRONT END FACE EDGING (2Vz x 2.V*)
two permanent-shelves .aifls
front/back edging -
(7 x 59)
note: ai :
STOCK IS THICK
NOTE: BUILD VALANCE AND PEGBOARD PANELS AS IN FIGURE 3 ON PAGE 21. (SEE MATERIALS LIST FOR PART OUANnnES AND DIMENSIONS
(3Vi x 24)
END #©„,VFh > ® EDGING WOODSCREW FRONT EDGING
(6x6) #6x1VFh WOODSCREW
26 ShopNotes No. 1)2